Also Suitable for iBook G3 iBook G4 PowerBook G4
NB:PowerBook G3 and iBook Clamshell Require 3.5mm Jack
Basic version of Apple power connectorWorks without the internal LEDs or the outer sleeve. The basis of the connector is a 2.5mm (yes 2.5mm, not 3.5mm) male jack. Functioning 100%, including charging the battery.
| power adapter cable Pin |
Name | Direction | Description |
|---|---|---|---|
| 1 (left) | sense | 400KOhm to GND | |
| 2 (right) | GND | Ground | |
| 3 (ground) | Vin | <-- td=""> | +24V power |
Only numbers are taking in account at drawing.
Correction for Powerbook G3 and Clamshell Notebook (3.5 mm jack): Tip (1 = front-most connector) is _NOT_ connected. Ring (2 = middle connector) is the common lead (minus polarity). The sleeve (3) is connected to +24V, this is the inner (hot) wire (with white insulation) of the original G3 (yo-yo type) power adaptor.
Also there is a supply for the loading indicator LED _within_ the plug. A resistor from +24V to the outer 9.5mm tube around the power plug.
No comments:
Post a Comment